P P P   Q U I C K   S T A R T
                         -----------------------------

PPP is a DOS ODI driver that implements the Point-to-Point Protocol over
a standard serial port, and supports IP protocol stacks.   PPP also
supports PAP (Password Authentication Protocol) for security.

LOADING THE PPP DRIVER
----------------------

    Since the PPP driver is an ODI driver, it requires a program called
LSL.COM to be loaded prior to loading the PPP driver.  LSL.COM is a Novell
program (known as the Link Support Layer), and is provided with Novell's
Netware and other Novell products.  Klos Technologies, Inc. has licensed
this program and distributes this file as a courtesy to our customers.

LOADING THE PPP DRIVER FOR USE WITH LAN WORKPLACE
-------------------------------------------------

    The typical sequence of events for loading the PPP driver for use with
Novell's LAN WorkPlace products are as follows:

        LSL
        PPP
        PPPMENU         (to configure and establish a connection)
        TCPIP           (from Novell)

    At this point, you should be able to run PING, TNVT220, FTP or any
other LAN WorkPlace applications.

LOADING THE PPP DRIVER FOR USE WITH KALI
----------------------------------------

    The typical sequence of events for loading the PPP driver for use with
KALI are as follows:

        LSL
        PPP
        IPSTUB          (provides an ethernet packet driver interface)
        PPPMENU         (to configure and establish a connection)
        PPPWAT          (this updates your WATTCP.CFG file)
        KALI @CENTRAL   (connects you to Kali Central)

    At this point, you would load KCHAT or your gaming software.  If you
have any problems using the KALI software, you can contact KALI technical
support by sending email to 'support@kali.net'.

LOADING THE PPP DRIVER FOR USE WITH DOSLYNX
-------------------------------------------

    The typical sequence of events for loading the PPP driver for use with
DOSLYNX are as follows:

        LSL
        PPP
        IPSTUB                  (provides an ethernet packet driver interface)
        PPPMENU                 (to configure and establish a connection)
        PPPWAT DOSLYNX.CFG      (this updates your DOSLYNX.CFG file)
        DOSLYNX                 (start DOSLYNX)

LOADING THE PPP DRIVER FOR USE WITH AN ETHERNET PACKET DRIVER BASED IP STACK
----------------------------------------------------------------------------

    The typical sequence of events for loading the PPP driver for use with
an ethernet packet driver based IP stack (such as FTP Software's PCTCP,
Kali, or NCSA Telnet) are as follows:

        LSL
        PPP
        IPSTUB          (provides an ethernet packet driver interface)
        PPPMENU         (to configure and establish a connection)

    At this point, you would load your ethernet packet driver based IP
stack.  For FTP Software's PCTCP, you'd load ETHDRV.  Any other IP
applcation designed for use with an ethernet packet driver could be
loaded at this point.

PPP TECHNICAL SUPPORT
---------------------

This software is provided free of charge and WITHOUT support.

To inquire about the retail version that supports IPX with
CIPX header compression, VJ header compression for IP, CHAP
and other features, please send email to sales@klos.com.

KALI TECHNICAL SUPPORT
----------------------

If you're having problems using PPP with KALI, you should
email to support@kali.net.